Wie lange halten die Schneiden und wie oft müssen sie geschärft werden?

Die Schneiden bestehen aus Hardox 600 und sind für den Dauerbetrieb ausgelegt. Bei normalem Brennholzeinsatz halten sie viele Jahre; je nach Holzart reicht gelegentliches Nachschärfen.

Kann ich damit auch Holz mit Steinen oder Nägeln verarbeiten?

Ja. Es gibt keine Säge, die stumpf werden könnte. Die Schneiden zwicken auch Nägel und kleinere Steine mit durch – ideal z. B. für Abbruchholz.

Ich habe spezielle Anforderungen oder Zubehörwünsche – geht das?

Ja, gern über das Kontaktformular anfragen. Das Team meldet sich zeitnah und findet eine passende Lösung.

Kann ich den Sägespaltautomat testen?

Nach Anmeldung vor Ort in 98743 Gräfenthal; auf Wunsch wird ein Vorführtermin in deiner Nähe vermittelt.

Gibt es eine Garantie?

Ja – 1 Jahr für Profis, 2 Jahre für Privatnutzer. Ersatzteile und schneller Support sind verfügbar.

Warum keine Hydraulik?

Der Spaltmeister läuft mit jeder Zapfwelle: kein Öl, keine Schläuche, keine Lecks – robust, unkompliziert, wartungsarm.

Wie groß und wie schwer ist der Spaltmeister?

Transportstellung ca. 1,60 m (B) × 1,80 m (L) × 1,90 m (H); Gewicht ca. 650–680 kg.

Firewood processor and thin wood: Where the processor stops, the Spaltmeister starts

Enquire now

The problem

Your firewood processor is built for thick wood – but what do you do with the rest?

A firewood processor is powerful for logs above 20 cm. But 60–70% of your wood is thinner. Crown wood, thinning material, small-diameter logs – the stuff that comes in bulk and that you have to feed through piece by piece. Below 20 cm, every processor becomes extremely unproductive. The MEHOMA Spaltmeister 3400 fills exactly this gap – a cutting splitter, no saw. Much simpler technology, built for wood up to 21 cm diameter.

how can this be done better?

your benefits

Cutting splitter vs firewood processor – why it makes the difference with thin wood:

The Spaltmeister has no saw. It cuts and splits mechanically via the PTO – no hydraulics, no chains, none of the typical wear parts of a processor. This makes it radically simpler: maintenance means greasing, done. Operating costs 90% lower than a processor. And exactly where your processor stalls, the Spaltmeister hits its stride: up to 20 cubic metres per hour for wood up to 21 cm.

Enquire now

5 to 7 cubic metres / hour

Easily done in one day for the whole year.
At 33 to 50 cm log length, 5 to 7 stacked cubic metres per hour alone, 7 to 10 with two people. Stacked cubic metres, not loose volume.

Easy maintenance

No oil changes, no hydraulic hoses. Just grease and go.

Up to 21 cm diameter

Now every piece is worth it – efficient processing even for thin wood

20–60 cm log length

Whether for personal use or resale: log length is flexible and easy to adjust.

Quartering possible

Cut without splitting or quarter thicker wood – get the best out of every piece.

back

5 to 7 cubic metres / hour

Easily done in one day for the whole year.
At 33 to 50 cm log length, 5 to 7 stacked cubic metres per hour alone, 7 to 10 with two people. Stacked cubic metres, not loose volume.

Easy maintenance

No oil changes, no hydraulic hoses. Just grease and go.

Up to 21 cm diameter

Now every piece is worth it – efficient processing even for thin wood

20–60 cm log length

Whether for personal use or resale: log length is flexible and easy to adjust.

Quartering possible

Cut without splitting or quarter thicker wood – get the best out of every piece.

No hydraulics

Hydraulic splitters are prone to breakdowns. Because our system is so simple, there are virtually no points of failure.

Only 1.6 m wide

With the conveyor folded in, you can drive on normal roads without worrying about width restrictions.

3.4 m conveyor belt

Your freshly split wood goes exactly where it should: into the BigBag, the trailer, or simply onto a pile.

680 kg weight

At just 680 kg, the Spaltmeister is easy to move into position. Stable footing on every job – and light enough for any tractor.

35 HP minimum

Your tractor only needs 35 HP minimum. If you try to split wood that’s too hard, the tractor simply stalls – no damage, just keep going.

Max. 540 RPM

Ready to run at just 300 RPM – a standard 540 PTO is more than enough. The Spaltmeister operates in the efficient RPM range and saves fuel – ideal for working with any standard tractor.

Processor for thick logs, MEHOMA 4-in-1 firewood method for everything below

Das ideale Setup: Dein SSA verarbeitet das Stammholz ab 20 cm. Der Spaltmeister übernimmt das gesamte Dünnholz – Kronenholz, Schwachholz, Durchforstungsmaterial – und macht daraus in einem Durchgang ofenfertiges Brennholz. Rundholz rein, Scheitholz über das integrierte 3,4-Meter-Förderband direkt in den BigBag oder Anhänger. Wer keinen SSA hat und hauptsächlich Dünnholz verarbeitet, braucht auch keinen – der Spaltmeister allein reicht.

Talk to us

"For me it is the ideal solution for the thin wood that comes with every job"

Thomas Jahn

Forestry contractor and Spaltmeister owner

testimonials

What our customers say

Enquire now

"There is always thin wood that comes with every job, and for me this is the best way to deal with it"

Thomas Jahn

Forestry contractor and Spaltmeister owner

"The machine runs perfectly... only our girls don't find it quite as great as in the ads. It really is a good, simple machine. Superb!"

Walter

proud owner of a Spaltmeister 3400

"Everything went smoothly, it works! A real relief and many times faster than usual!"

Michael und Joachim Eschrich

Testers of the MEHOMA Spaltmeister

"An all-round solid machine, perfect for processing tops! Very robust build, nothing to complain about."

Florian

Tester of the MEHOMA Spaltmeister

"We did about 100 cubic metres over the weekend, and it was really fast!"

Niklas Eschrich (Knäcke)

after his first time using the Spaltmeister

Independently tested on YouTube

Two channels that filmed the Spaltmeister without our involvement. Videos in German. One click loads the video from YouTube.

Der kleine DreXlerThe fastest way to make firewood that nobody knows! Cutting splitter: hit or flop?!Load video (youtube-nocookie.com)Bart FarmThe Spaltmeister at work on the farm, from minute 5:13Load video (youtube-nocookie.com)

Andreas shows the Spaltmeister

Andreas is so taken with the Spaltmeister that he now runs demos and contract work with it around Erfurt and Sömmerda.

Michael and Joachim Eschrich

Much faster, and a lot more fun Two testers share their great time with the Spaltmeister: firewood made much faster, and plenty of fun along the way.

Jens

Fast. Precise. A time saver. The Spaltmeister makes splitting thin wood and crooked branches far easier, cuts precisely to 25 cm and saves valuable time.

Florian

Fast. Tough. Reliable. Florian praises the Spaltmeister as a fast, sturdy and dependable machine that makes firewood work much easier, and a lot of fun.

Niklas Eschrich (Knäcke)

100 cubic metres in one weekend Knäcke processes 100 stacked cubic metres of firewood with the Spaltmeister in a single weekend: faster, cleaner and with less waste than conventional methods. Even the offcuts go into kindling.

who is behind mehoma?

We are Freya and Johannes, a family with a house, a farm, kids and very little time. As committed wood burners we know: making firewood with conventional equipment takes weeks, time that is often missing in everyday life.
Since the bark beetle calamity, almost all the wood we get is thin – tedious to process, but far too good to leave lying around. Johannes brings years of experience as a forester. Today we manage our forest sustainably for our family and the next generations. In 2022 we discovered a machine concept in Finland that fascinated us: the wood was done in one day, but the quality wasn’t right. So together with a machine builder we developed a new, practical solution: the MEHOMA Spaltmeister 3400. MEHOMA stands for MEin HOlz MAchen (making my own wood) – efficient, well thought out and with joy. What used to take three weeks, we now finish in one day. And the best part: we pass this solution on.
So that more people can leave the stress of firewood behind and win back time for life. “Our generation needs practical solutions to really shape life in the countryside.”

In 2022 we discovered a machine concept in Finland that fascinated us: the wood was done in one day, but the quality wasn’t right. So together with a machine builder we developed a new, practical solution: the MEHOMA Spaltmeister 3400.

MEHOMA stands for MEin HOlz MAchen (making my own wood) – efficient, well thought out and with joy. What used to take three weeks, we now finish in one day. And the best part: we pass this solution on.

So that more people can leave the stress of firewood behind – and win back time for life.

“Our generation needs practical solutions to really shape life in the countryside.”

Show less

Request a demo

contact

Five minutes on the phone. Then you decide.

You fill in the form, Nadja calls you back, on working days usually within two hours. In five minutes we work out whether the Spaltmeister fits you at all: your tractor, your wood, your workflow. After that you decide whether to go on. No catalogue, no pressure.

For orientation up front: from 7,990 € net (9,508.10 € incl. VAT), collected from our yard in 98743 Gräfenthal, Germany. Delivery EU-wide via our logistics partner, transit time 4 to 8 working days.

Thank you! Nadja will call you back, on working days usually within two hours.

Oops, something went wrong. Please try again.

faq

frequently asked questions

How long do the blades last, and how often do they need sharpening?

The blades are made from Hardox 600 – highly wear-resistant and built for continuous use. Under normal firewood conditions, they’ll last for many years. Depending on the wood and frequency of use, a seasonal check and light touch-up sharpening are usually all it takes.

Can I use it on wood with nails or stones in it?

Absolutely! Since there’s no saw to dull, the Hardox 600 blades handle nails and small stones with ease – ideal for turning demolition wood into clean, ready-to-burn firewood.

I have special requirements or need accessories – is that possible?

Yes, of course! Just write to us using the contact form and tell us what you need. We’ll get back to you promptly and find the best solution together.

Can I try it out?

Sure! By appointment any time at our place in 98743 Gräfenthal, Germany. Too far? Across Germany and Austria there is usually a Spaltmeister running at a customer or partner within an hour's drive. Get in touch via the contact form: in the first call we check whether the machine fits your wood and your workflow, then we arrange a demo near you. That way we only take up our partners' time when it really fits.

Is there a warranty?

Yes – 1 year for professional users, 2 years for private users. And even after that, we won’t leave you hanging: spare parts are available, help is fast, and our know-how is always included for free.

Is it possible to rent a machine to make my firewood?

Yes, in many cases! Contact us – often our demo units are available for rent, and some of our customers also offer their Spaltmeister for rental.

I have another question

No problem – we’re happy to help! Just send us your question via the contact form. We’ll get back to you as soon as possible.

Why no hydraulics?

Because it's simpler and safer: the Spaltmeister runs on any PTO, no matter how old the tractor. No hydraulics, no oil, no hoses, no leaks. Just pure mechanics: robust, reliable, and easy to maintain.

Why is there no feed belt?

Because in many cases, it causes more trouble than it’s worth: feed belts wear out quickly, are costly to replace, and struggle with crooked or poorly debranched logs. They also limit flexibility – you can’t trim thin wood manually or rotate logs to quarter thick pieces. And that’s exactly where the Spaltmeister shines: maximum control, maximum versatility.

How big is the Spaltmeister?

Compact and garage-friendly: in transport mode, it measures 1.60 m wide, 1.80 m long, and 1.90 m high. Without the feed hopper, it takes up just 1.60 × 1.10 m of floor space.

Which tractor do I need?

One with a PTO and at least 35 hp. The Spaltmeister runs from 300 rpm, a standard 540 PTO is plenty. No hydraulic connections needed, the machine is purely mechanical. At 680 kg it sits safely on small tractors too. If you ever catch a piece that is too tough, the tractor simply stalls and you carry on without damage.

How heavy is the Spaltmeister?

It weighs 680 kg. Its solid build ensures a stable stand – even without being mounted to the tractor’s three-point hitch.

Does the wood bounce during processing?

No – not when used properly. If the wood is placed cleanly onto the blades, it moves only slightly and can be guided by hand. Noticeable bouncing typically only occurs if the blades are damaged or misaligned.

How many cubic metres does the Spaltmeister process per hour?

It depends on log length and crew, so here are the real numbers: at 20 to 25 cm, 3 to 4 stacked cubic metres per hour alone, 5 to 6 with two people. At 33 cm, 5 to 6 alone, 7 to 9 with two. At 50 cm, 5 to 7 alone, 10 and more with two. All figures are stacked cubic metres, not loose volume (one stacked metre is roughly 1.4 loose). Our record is 20 stacked metres in one hour: two people, 50 cm, straight 17 cm logs, not a single empty cycle. Sporty, not everyday.

From what diameter is the Spaltmeister worth it, and where is the limit?

There is no technical lower limit: whatever you pick up, you can process, even hazel rods. It just gets slower at 5 cm because each piece carries less wood. The machine is at its best around 17 cm: plenty of wood per piece, still easy to guide with one hand. The upper limit is 21 cm. Anything thicker stays with your splitter or firewood processor, and for most people that is the smaller part of the work.

Can I process hardwood with it?

Yes – hardwoods like beech, oak, hornbeam, and maple can be processed continuously without issue. In Italy, one Spaltmeister is even in nonstop use processing holm oak.

What do I do with wood over 21 cm?

That stays with your splitter or firewood processor. The Spaltmeister is not an all-round machine, it is built for the wood under 21 cm that makes up 60 to 70 percent of your work. Many of our customers run exactly this split: processor or splitter for the thick logs, Spaltmeister for crown wood, thinnings and poles. The thick logs are done in ten minutes, the rest used to be the time sink.

Where do you deliver?

Across the entire EU, right to your yard, via our logistics partner. Transit time 4 to 8 working days. Whether you add transport or collect from us in 98743 Gräfenthal, Germany, is up to you.

What does the Spaltmeister 3400 cost?

The base machine starts at 7,990 € net, collected from our yard in 98743 Gräfenthal, Germany (in Germany 9,508.10 € incl. 19 % VAT), Europe-wide. Depending on your needs, add PTO shaft, transport, on-site training and support. We put that together individually, because a forestry contractor with 300 cubic metres needs something different from a woodland owner with 30. We work out what you really need when we talk, then you get a quote that fits your wood. Financing is available.

Is it worth it at 30, 50 or 80 cubic metres a year?

Count your hours, not the brochure. With chainsaw and splitter, most people need 1 to 2 hours per cubic metre of thin wood. 50 cubic metres is 50 to 100 hours, ten to twenty Saturdays. With the Spaltmeister at 33 cm it is about 8 to 10 hours, one or two Saturdays. On top of that, crown wood and thinnings that used to stay in the forest or go into the chipper suddenly become sellable firewood. Whether it pays off for you depends on how much wood you get, what your hour is worth and whether you sell. That is exactly what we work through together, honestly, even if the answer turns out to be no. For your own numbers up front: samstage.spaltmeister.com, our weekend calculator (in German).

How long does delivery take?

Usually the Spaltmeister is at your place within 14 days. The transport itself takes 4 to 8 working days.

Does it create a lot of splinters or waste?

The Spaltmeister doesn’t produce sawdust. Depending on the type and moisture of the wood, some splinters may result from splitting – but no more than with other methods. The minimal fine fraction is perfect for kindling, since it’s sawdust-free and dries quickly.