The wood processing machine for thin round wood. In as a pole, out as firewood.

The problem

Looking for a wood processing machine? First question: for which wood?

Planer, circular saw, router: most wood processing machines are built for the workshop. Outdoors a different kind of wood comes in, every single year: thin round wood from thinning, crowns, hedge cutting, storm damage and sawmill offcuts. Poles of 5 to 21 cm, too good to leave lying around, but one to two hours of work per cubic metre with chainsaw and splitter. The Spaltmeister 3400 is built for exactly this wood: a machine that turns the round wood into ready-to-burn firewood in one pass.

your benefits

From round wood to finished firewood, straight onto the conveyor:

You feed in the pole, the Spaltmeister cuts it to stove length and splits it in the same cycle, mechanically, without saw and without hydraulics. The finished logs drop onto the built-in 3.4-metre conveyor and land in the trailer, the BigBag or on the pile. No second machine, no rearranging, no picking up. Log length adjustable from 20 to 60 cm, cut without splitting for thin poles, quartering for thicker wood. Maintenance: grease and go. From 35 hp tractor. In practice 5 to 7 stacked cubic metres per hour alone at 33 to 50 cm log length, 7 to 10 with two people.

  • 5 to 7 cubic metres / hour

    Easily done in one day for the whole year.
    At 33 to 50 cm log length, 5 to 7 stacked cubic metres per hour alone, 7 to 10 with two people. Stacked cubic metres, not loose volume.

  • Easy maintenance

    No oil changes, no hydraulic hoses. Just grease and go.

  • Up to 21 cm diameter

    Now every piece is worth it – efficient processing even for thin wood

  • 20–60 cm log length

    Whether for personal use or resale: log length is flexible and easy to adjust.

  • Quartering possible

    Cut without splitting or quarter thicker wood. You decide what comes out.

No hydraulics

Hydraulic splitters are prone to breakdowns. Because our system is so simple, there are virtually no points of failure.

Only 1.6 m wide

With the conveyor folded in, you can drive on normal roads without worrying about width restrictions.

3.4 m conveyor belt

Your freshly split wood goes exactly where it should: into the BigBag, the trailer, or simply onto a pile.

680 kg weight

At just 680 kg, the Spaltmeister is easy to move into position. Stable footing on every job – and light enough for any tractor.

35 HP minimum

Your tractor only needs 35 HP minimum. If you try to split wood that’s too hard, the tractor simply stalls – no damage, just keep going.

Max. 540 RPM

Ready to run at just 300 RPM – a standard 540 PTO is more than enough. The Spaltmeister operates in the efficient RPM range and saves fuel – ideal for working with any standard tractor.

The MEHOMA 4-in-1 firewood method: round wood becomes ready-to-burn firewood in one pass

Feed in, cut to length, split, load: four work steps, one pass. The conveyor is built in, you need no second machine and nobody picking up at the back. Log length 20 to 60 cm, depending on stove or boiler. One day is enough for the year’s supply, and the thin wood that used to stay behind is now the first thing you process.

"For me it is the ideal solution for the thin wood that comes with every job"

Thomas Jahn

Forestry contractor and Spaltmeister owner

Weekend calculator

How many Saturdays does your firewood cost you?

And how many of them do you get back? Enter your numbers and the calculator compares your current method with the Spaltmeister 3400.

How do you make your firewood today?

Time values for wood from 10 to 20 cm, adjustable below.

Your situation
m³ stacked For yourself, family, neighbours or for sale.
Unit

Stacked, as in the woodshed.

How many of you make the firewood today?
hours
And with the Spaltmeister?
Log length
How many at the Spaltmeister?

Measured at 33 cm: alone 5 to 6, two people 7 to 9 cubic metres per hour.

Check and adjust time values (today 110 min per m³)

Minutes per cubic metre and person, for wood from 10 to 20 cm. If you know your own times, enter them.

My values today

Range 15 to 40 min min/m³
Range 45 to 95 min min/m³
Range 10 to 25 min min/m³

Today: 110 minutes per cubic metre and person, that is 0.55 cubic metres per hour and person.

My value for the Spaltmeister

m³/h

Default 5.5 m³/h, middle of the measured range. Stacked cubic metres, not loose volume.

6.8 free Saturdays a year See result

What the Spaltmeister gives you back

6.8 free Saturdays a year

Today 7.6 Saturdays, with the Spaltmeister 0.8 Saturdays. Based on 6 hours per Saturday.

In 10 years: about 68 free Saturdays

For your family, or for wood you sell.

Time compared

Your yearly need: 25 cubic metres

Today: Chainsaw + splitter, alone

7.6 Saturdays

45.8 hours

Spaltmeister: 33 cm, alone

0.8 Saturdays

4.5 hours

Request a callback

Is the Spaltmeister right for your wood and your tractor? A quick call settles it. No sales pitch.

Where the numbers come from

With thin wood, time depends on the number of pieces, not the volume. One cubic metre of logs from 15 cm poles is about 100 pieces, from 10 cm poles about 240. Every piece is sawn, lifted, split and picked up on its own. That is why chainsaw-and-splitter times for thin wood are far above what brochures quote for thick rounds. All defaults are the middle of their range, the Spaltmeister included. Skidding and staging are not included, both methods need them.

  • Chainsaw and upright splitter, alone: about 110 minutes per cubic metre, range 70 to 160. That matches what forest owners tell us: 1 to 2 hours per stère.
  • Metre-wood chain (chainsaw to 1 m, metre-wood splitter, cross-cut saw): about 90 minutes per cubic metre, range 60 to 120. Faster than the upright splitter because only a third of the cuts and splits are needed.
  • Chainsaw and axe: about 140 minutes per cubic metre for softwood, much longer for hardwood.
  • Small hand-fed firewood processor with 15 cm wood: about 40 minutes per cubic metre including feeding and unloading, range 20 to 60. Brochure figures almost always refer to loose cubic metres and wood from 25 cm.
  • Spaltmeister 3400, measured in practice: at 33 cm log length alone 5 to 6 cubic metres per hour, two people 7 to 9. The calculator uses the middle of the range. Our record with two people at 50 cm is 20 cubic metres per hour, that is sport, not everyday work.

Example: 40 cubic metres of thinning wood. With chainsaw and splitter alone that is about 73 hours, 12 Saturdays at 6 hours each. With the Spaltmeister at 33 cm alone about 7 hours, so 1.2 Saturdays. About 11 Saturdays a year that belong to you.

Sources of the time values: time studies by the Bavarian State Institute of Forestry and the Technology and Support Centre Straubing (firewood production, 40 time studies), Agroscope (working time for energy wood), Lindroos 2008 (Silva Fennica), Spinelli et al. 2014, plus field values from our customers. All values in stacked cubic metres.

testimonials

What our customers say

  • "There is always thin wood that comes with every job, and for me this is the best way to deal with it"

    Thomas Jahn

    Forestry contractor and Spaltmeister owner

  • "The machine runs perfectly... only our girls don't find it quite as great as in the ads. It really is a good, simple machine. Superb!"

    Walter

    proud owner of a Spaltmeister 3400

  • "Everything went smoothly, it works! A real relief and many times faster than usual!"

    Michael und Joachim Eschrich

    Testers of the MEHOMA Spaltmeister

  • "An all-round solid machine, perfect for processing tops! Very robust build, nothing to complain about."

    Florian

    Tester of the MEHOMA Spaltmeister

  • "We did about 100 cubic metres over the weekend, and it was really fast!"

    Niklas Eschrich (Knäcke)

    after his first time using the Spaltmeister

  • Andreas shows the Spaltmeister

    Andreas is so taken with the Spaltmeister that he now runs demos and contract work with it around Erfurt and Sömmerda.

  • Michael and Joachim Eschrich

    Much faster, and a lot more fun Two testers share their great time with the Spaltmeister: firewood made much faster, and plenty of fun along the way.

  • Jens

    Fast. Precise. A time saver. The Spaltmeister makes splitting thin wood and crooked branches far easier, cuts precisely to 25 cm and saves valuable time.

  • Florian

    Fast. Tough. Reliable. Florian praises the Spaltmeister as a fast, sturdy and dependable machine that makes firewood work much easier, and a lot of fun.

  • Niklas Eschrich (Knäcke)

    100 cubic metres in one weekend Knäcke processes 100 stacked cubic metres of firewood with the Spaltmeister in a single weekend: faster, cleaner and with less waste than conventional methods. Even the offcuts go into kindling.

Independently tested on YouTube

Two channels that filmed the Spaltmeister without our involvement. Videos in German. One click loads the video from YouTube.

  • Der kleine DreXler

    The fastest way to make firewood that nobody knows! Cutting splitter: hit or flop?!

    Load video (youtube-nocookie.com)

  • Bart Farm

    The Spaltmeister at work on the farm, from minute 5:13

    Load video (youtube-nocookie.com)

who is behind mehoma?

We are Freya and Johannes, a family with a house, a farm, kids and very little time. As committed wood burners we know: making firewood with conventional equipment takes weeks, time that is often missing in everyday life. Since the bark beetle calamity, almost all the wood we get is thin – tedious to process, but far too good to leave lying around. Johannes brings years of experience as a forester. Today we manage our forest sustainably for our family and the next generations. In 2022 we discovered a machine concept in Finland that fascinated us: the wood was done in one day – but the quality wasn’t right. So together with a machine builder we developed a new, practical solution: the MEHOMA Spaltmeister 3400. MEHOMA stands for MEin HOlz MAchen (making my own wood) – efficient, well thought out and with joy. What used to take three weeks, we now finish in one day. And the best part: we pass this solution on. So that more people can leave the stress of firewood behind and win back time for life. “Our generation needs practical solutions to really shape life in the countryside.”

contact

Is the Spaltmeister right for your wood? A quick call settles it.

You fill in the form, Nadja calls you back, on working days usually within two hours. No sales pitch: we check whether your tractor, your wood and your workflow fit, and answer your questions. Whether and how to go on is up to you, in your own time.

For orientation up front: from 7,990 € net (9,508.10 € incl. VAT), collected from our yard in 98743 Gräfenthal, Germany. Delivery EU-wide via our logistics partner, transit time 4 to 8 working days.

Nadja will call you back, on working days usually within two hours.

When you send this, we use your details to call you back and handle your request. More in our privacy policy.

faq

frequently asked questions

How long do the blades last, and how often do they need sharpening?

The blades are made from Hardox 600 – highly wear-resistant and built for continuous use. Under normal firewood conditions, they’ll last for many years. Depending on the wood and frequency of use, a seasonal check and light touch-up sharpening are usually all it takes.

Can I use it on wood with nails or stones in it?

Absolutely! Since there’s no saw to dull, the Hardox 600 blades handle nails and small stones with ease – ideal for turning demolition wood into clean, ready-to-burn firewood.

I have special requirements or need accessories – is that possible?

Yes, of course! Just write to us using the contact form and tell us what you need. We’ll get back to you promptly and find the best solution together.

Can I try it out?

Sure! By appointment any time at our place in 98743 Gräfenthal, Germany. Get in touch via the contact form: in the first call we check whether the machine fits your wood and your workflow.

Is there a warranty?

Yes – 1 year for professional users, 2 years for private users. And even after that, we won’t leave you hanging: spare parts are available, help is fast, and our know-how is always included for free.

Is it possible to rent a machine to make my firewood?

Yes, in many cases! Contact us – often our demo units are available for rent, and some of our customers also offer their Spaltmeister for rental.

I have another question

No problem – we’re happy to help! Just send us your question via the contact form. We’ll get back to you as soon as possible.

Why no hydraulics?

Because it's simpler and safer: the Spaltmeister runs on any PTO, no matter how old the tractor. No hydraulics, no oil, no hoses, no leaks. Just pure mechanics: robust, reliable, and easy to maintain.

Why is there no feed belt?

Because in many cases, it causes more trouble than it’s worth: feed belts wear out quickly, are costly to replace, and struggle with crooked or poorly debranched logs. They also limit flexibility – you can’t trim thin wood manually or rotate logs to quarter thick pieces. And that’s exactly where the Spaltmeister shines: maximum control, maximum versatility.

How big is the Spaltmeister?

Compact and garage-friendly: in transport mode, it measures 1.60 m wide, 1.80 m long, and 1.90 m high. Without the feed hopper, it takes up just 1.60 × 1.10 m of floor space.

Which tractor do I need?

One with a PTO and at least 35 hp. The Spaltmeister runs from 300 rpm, a standard 540 PTO is plenty. No hydraulic connections needed, the machine is purely mechanical. At 680 kg it sits safely on small tractors too. If you ever catch a piece that is too tough, the tractor simply stalls and you carry on without damage.

How heavy is the Spaltmeister?

It weighs 680 kg. Its solid build ensures a stable stand – even without being mounted to the tractor’s three-point hitch.

Does the wood bounce during processing?

No – not when used properly. If the wood is placed cleanly onto the blades, it moves only slightly and can be guided by hand. Noticeable bouncing typically only occurs if the blades are damaged or misaligned.

How many cubic metres does the Spaltmeister process per hour?

It depends on log length and crew, so here are the real numbers: at 20 to 25 cm, 3 to 4 stacked cubic metres per hour alone, 5 to 6 with two people. At 33 cm, 5 to 6 alone, 7 to 9 with two. At 50 cm, 5 to 7 alone, 10 and more with two. All figures are stacked cubic metres, not loose volume (one stacked metre is roughly 1.4 loose). Our record is 20 stacked metres in one hour: two people, 50 cm, straight 17 cm logs, not a single empty cycle. Sporty, not everyday.

From what diameter is the Spaltmeister worth it, and where is the limit?

There is no technical lower limit: whatever you pick up, you can process, even hazel rods. It just gets slower at 5 cm because each piece carries less wood. The machine is at its best around 17 cm: plenty of wood per piece, still easy to guide with one hand. The upper limit is 21 cm. Anything thicker stays with your splitter or firewood processor, and for most people that is the smaller part of the work.

Can I process hardwood with it?

Yes – hardwoods like beech, oak, hornbeam, and maple can be processed continuously without issue. In Italy, one Spaltmeister is even in nonstop use processing holm oak.

What do I do with wood over 21 cm?

That stays with your splitter or firewood processor. The Spaltmeister is not an all-round machine, it is built for the wood under 21 cm that makes up 60 to 70 percent of your work. Many of our customers run exactly this split: processor or splitter for the thick logs, Spaltmeister for crown wood, thinnings and poles. The thick logs are done in ten minutes, the rest used to be the time sink.

Where do you deliver?

Across the entire EU, right to your yard, via our logistics partner. Transit time 4 to 8 working days. Whether you add transport or collect from us in 98743 Gräfenthal, Germany, is up to you.

What does the Spaltmeister 3400 cost?

The base machine starts at 7,990 € net, collected from our yard in 98743 Gräfenthal, Germany (in Germany 9,508.10 € incl. 19 % VAT), Europe-wide. Depending on your needs, add PTO shaft, transport, on-site training and support. We put that together individually, because a forestry contractor with 300 cubic metres needs something different from a woodland owner with 30. We work out what you really need when we talk, then you get a quote that fits your wood. Financing is available.

Is it worth it at 30, 50 or 80 cubic metres a year?

Count your hours, not the brochure. With chainsaw and splitter, most people need 1 to 2 hours per cubic metre of thin wood. 50 cubic metres is 50 to 100 hours, ten to twenty Saturdays. With the Spaltmeister at 33 cm it is about 8 to 10 hours, one or two Saturdays. On top of that, crown wood and thinnings that used to stay in the forest or go into the chipper suddenly become sellable firewood. Whether it pays off for you depends on how much wood you get, what your hour is worth and whether you sell. That is exactly what we work through together, honestly, even if the answer turns out to be no. For your own numbers up front: samstage.spaltmeister.com, our weekend calculator (in German).

How long does delivery take?

Usually the Spaltmeister is at your place within 14 days. The transport itself takes 4 to 8 working days.

Does it create a lot of splinters or waste?

The Spaltmeister doesn’t produce sawdust. Depending on the type and moisture of the wood, some splinters may result from splitting – but no more than with other methods. The minimal fine fraction is perfect for kindling, since it’s sawdust-free and dries quickly.